LBI manufactures a wide range of alloys. Our know-how combined to our means of laboratories and controls enables us to meet the very diversify requirements of worldwide market.

Below, you can find some of the alloys we produce (they are listed by 'family'), as well as their approximate correspondences. They constitute only few examples of our potential, so do NOT hesitate to appeal to our team for all you need.

Copper based alloys:

• Tin bronzes
• Leaded bronzes
• Ordinary brasses and highly resistant brasses
• Nickel aluminum bronzes
• Copper and special copper
• Copper-Nickel alloys

Aluminum based alloys

Iron based alloys: stainless and heat resisting steels:

• Heat resisting steels

MARTENSITIC STEELS

MARTENSITIC STEELS ( non exhaustive list)

Material Code Norm NFA Norm EN Norm DIN Norm BS Norm ASTM 1.4931 GX23CrMoV12-1 WNr. 1.4931 - NFA 32060 GX23CrMoV12-1 WNr. 1.4931 EN 10213 - EN 10293 X22CrMoV12-1 WNr. 1.4923 CA-28MWV ASTM A743 1.4011 GX12Cr12 WNr. 1.4011 - NFA 32060 Z12C 13 NFA 32059 GX12Cr12 WNr. 1.4011 - EN 10283 X10Cr13 WNr. 1.4006 X15Cr13 WNr. 1.4024 420C21/420C28/420C29 BS 3100 CA-15 ASTM A217 / A487 / A743 CA-15M ASTM A487 / A743 ≈ AISI 410 1.4027 Z 22 C 13 NFA 32059 GX20Cr14 WNr. 1.4027 - SEW 410 420C24 BS 3100 Z30 Cr 13 NFA 32060 X 30 Cr 13 WNr. 1.4028 CA-40 / CA-40F ASTM A743 1.4107 GX8CrNi12 WNr. 1.4107 - NFA 32060 Z 6 CN 12-1 NFA 32059 GX8CrNi12 WNr. 1.4107 - EN 10213-2 G-X 8 CrNi 13 WNr. 1.4008 - DIN 17445 1.4008 GX7CrNiMo12-1 WNr. 1.4008 - NFA 32060 GX7CrNiMo12-1 WNr. 1.4008 - EN 10283 1.4317 / 1.6982 GX4CrNi13-4 WNr. 1.4317 - NFA 32060 GX3CrNi13-4 WNr. 1.6982 - NFA 32060 GX4CrNi13-4 WNr. 1.4317 - EN 10213 - EN 10283 - EN 10293 - EN 10340 G-X3CrNi13-4 WNr. 1. 6982 - EN 10213 - EN 10293 G-X5 CrNi 13 4 WNr. 1.4313 - DIN 17445 GX4CrNi13-4 WNr. 1.4317 - SEW 520 425C11 BS 3100 1.4407 / 1.4414 Z4 CND 13 4 NFA 32059 - NFA 32060 GX3CrNi13-4 WNr. 1.6982 - SEW 685-89 GX5CrNiMo13-4 WNr. 1.4407 GX4CrNiMo13-4 WNr. 1.4414 425C12 BS 3100 CA-6NM / E3N ASTM A743 1.4059 Z 15 CN 16-2 NFA 35574 GX22CrNi17 WNr. 1.4059 - SEW 410 ANC 2 BS 3146 ≈ UNS S43100 1.4421 GX4CrNi16-4 NFA 32060 Z4 CN 16-4 NFA 32059 GX4CrNi16-4 WNr. 1.4421 - EN 10293 CB6 ASTM A743 1.4405 GX4CrNiMo16-5-1 WNr. 1.4405 - NFA 32060 Z4 CND 16-4 NFA 32059 GX4CrNiMo16-5-1 WNr. 1.4405 - EN 10213 - EN 10283 - EN 10293 - EN 10340 G-X5 CrNiMo 16.5 WNr. 1.4405 - SEW 410 G-X3 CrNiMo 16-5 WNr. 1.6983 - SEW 685 1.4411 GX4CrNiMo16-5-2 WNr. 1.4411 - NFA 32060 GX4CrNiMo16-5-2 WNr. 1.4411 - EN 10283 1.4525 GX5CrNiCu16-4 WNr. 1.4425 - NFA 32060 Z5 CNU 16 4 NFA 32059 GX5CrNiCu16-4 WNr. 1.4525 - EN 10283 ANC 22 BS 3146 CB7 Cu-1 ASTM A743

(The equivalence between the standards is not absolute and some variations in composition can exist.)

• Austenitic steels
• Austeno-ferritic steels (Duplex and Super Duplex)

Nickel based alloys

Metallic matrix composite alloys: ALUSiC®

EXIUM® AM